NEC NEAX 2000 IPS Reference Manual page 27

Item
term
Attendant Terminal (D
SMDR Interface
PMS Interface
ACD / MIS or OAI Interface
Remote PIM over IP (Number of PIM at Remote
Site)
DID Dial Conversion
Call Forwarding-Outside Set
Authorization. Code / Forced Account Code /
Remote Access to System(DISA)Code
Message Reminder Set
Name Display / Guest Name Display
Speed Calling-Station (Station Speed Dial) Set
MP built-in SMDR Call Record
Note:
System Capacity is for Main site only. For Total System Capacity see IP Remote Network System Capacity.
NEAX2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349, Issue 4
IPS System Capacity (Single MP System cont'd)
ATT Position)
Capacity Per PIM
PIM1 PIM2 PIM3
Max. 8 sets per system
Max. 1 interface port per system
Max. 1 interface port per system
Max. 1 interface port per system
Up to 15 (depending on network)
Chapter 1 Introduction
Note 1
PIM4 PIM5 PIM6
1000
496
3000
1024
512
10000
1280
PIM7 PIM8
Page 1-21