NEC NEAX 2000 IPS Reference Manual page 312

Chapter 14 Common Channel Inter-Office Signaling (CCIS)
Required Equipment for Analog CCIS
Equipment
Name
PN-AP00-B AP00
PN-SC00 CCH
PN-2ODTA ODT
PZ-M537 EXPMEM
Required Equipment for CCIS Networking via IP
Description
CCIS via IP (non Peer-to-Peer)
SPN-IPTB
SPN-4VCTI
CCIS via IP (Peer-to-Peer)
PZ-M606-A
SPN-8IPLA IP PAD-B
PZ-24IPLA
Page 14-20
Functional
Name
Application Processor Card
Provides four RS-232C ports, and is used for
SMDR, Hotel Printer,
CIS, PMS, MCI, CS report functions.
One card per system.
Common Channel Handler Card
Transmits/receives signals on the common signaling
channel of CCIS.
2-line Out Band Dialing Trunk Card
Used as either a 2-wire E&M trunk or a 4-wire E&M
trunk.
Equipped with –48V DC-DC on-board power supply.
Both Circuits 0 and 1 must be set to the same
purpose
(2-wire or 4-wire) in one card.
Memory Expansion Card for AP00 Card
The system capacity is expanded when PZ-M537 is
mounted on
PN-AP00-B (AP00) card.
Memory Expansion for AP00 is shown in the table
below.
SYSTEM CAPACITY
SMDR call record
Network Interface:
ETHER/FAST ETHER
Codec Card for IP Trunk
On board Ethernet Interface Card
(ETHERNET TCP/IP)
IP Interface card for IP Pad
24-channel daughter board for 8IPLA
Function
NO EXPMEM WITH EXPMEM
1600
Remarks
NEAX 2000 IPS Request For Proposal (RFP) Reference Guide
27000
NDA-24349, Issue 4