NEC NEAX 2000 IPS Reference Manual page 20

Chapter 1 Introduction
Maintenance
MATWorX IPS is used as the maintenance program for the NEAX 2000 IPS. Direct connection (RS-
232C), Modem connection and LAN (TCP/IP) connections are available to connect to the MAT
(Maintenance Administration Terminal).
Hybrid System of IP (peer-to-peer connection) and TDM Switching
The NEAX 2000 IPS supports both pure IP switching (peer-to-peer connections) and Time Division
term
Switching (TDM). The pure IP switching is provided for communications between D IPs and for
DM
CCIS/Remote PIM connections with another NEAX 2000 IPS/ NEAX IPS /2400 IPX (CCIS over IP or
Remote PIM over IP). On the other hand, the TDM switching is provided for communications between
term
legacy stations/trunks. Connections between D IP/CCIS or Remote PIM over IP and legacy
stations/trunks are made via IP PADs, which converts packet-based voice data to TDM-based voice
data, and vice versa.
Built-in DRS (Device Registration Server) on MP
The NEAX 2000 IPS incorporates DRS (Device Registration Server) on MP, which provides a Log-
term
in/Log-out management of D IP including Registration, Authentication. Also the built-in DRS can be
.
inter-worked with DHCP server to provide easy administration of IP address
Reduced Hardware with IP based Architecture
term
The D IPs accommodated in a LAN do not require DLC card because they can be interfaced directly
term
with the LAN and connected with peer-to-peer basis. When D IP is connected with station/trunk,
which is accommodated in TSW, the speech path between LAN and TSW is made via IP PAD under
term
the call processing control of MP. The number of D IPs can be simply expanded by adding the
terminal itself and IP PADs if traffic volume is increased. With this system architecture, the hardware
such as DLC, PIM, Power Supply etc. is reduced and easy cost effective move, add, change is
realized.
Office Data Backup Enhancement
The office data of NEAX 2000 IPS is stored in Flash ROM.
Various Installation Methods
To meet the specific needs of the customers' environment, the NEAX 2000 IPS provides the following
installation methods:
Floor Standing Installation
Wall-mounting Installation
IEC standard 19-inch Rack-mounting Installation
Page 1-14 NEAX2000 IPS Request for Proposal (RFP) Reference Guide
ND-24349, Issue 4