NEC NEAX 2000 IPS Reference Manual page 184

Chapter 9 Feature Descriptions
Power Failure Transfer
This feature provides for specified trunks to be
automatically connected to designated Single
Line Telephones in the event of AC power
loss. It is normally used when the system is
not equipped with reserve power.
Priority Call
This feature allows the Attendant to answer a
call before other calls, at the Attendant's
discretion.
Privacy
This feature restricts Multiline Terminal users
from depressing a busy line button and
entering a conversation unless permitted by
the Multiline Terminal user currently on that
line button or if the line button is assigned for
Direct Privacy Release.
Direct Privacy Release
This feature allows a station user with a secondary
appearance of another extension in the system to
access that extension when it is being used by
someone else. This feature allows for a simplified
method for establishing a conference. In addition,
this feature can be used to emulate PC dialing,
where a single line extension connected to a PC
can appear on a Multiline Terminal and be
accessed by the Multiline Terminal user after the
PC is completed dialing.
Manual Privacy Release
This feature allows a Multiline Terminal user to
enter a conversation on a busy line button if the
Multiline Terminal user already in the conversation
allows them by releasing Privacy.
Private Lines
Only a C.O. trunk assigned to that specific
station is seized when a station user
originates an outgoing C.O. call or when an
incoming C.O. call is terminated at the station
designated by Direct-In-Termination. In this
manner, stations and C.O. trunks are to be
associated on a 1-to-1 basis.
Page 9- 26
Property Management System Interface
The NEAX2000 IPS provides a data interface
to a locally provided Property Management
System (PMS). This enables communication
between the NEAX2000 IPS and the PMS in
order to provide computer control of Hotel/
Motel features.
Proprietary Multiline Terminal
The are several Multiline Terminals available
which can be used with the NEAX2000 IPS.
term
• Legacy: D Series i
term
• Legacy: D Series E (Display/Non-Dispalay)
term term
• D IP: D Series E (Display)
term term
• D IP: D Series i (Display)
• Legacy: Electra Elite(Display/Non-Dispalay)
Automatic Idle Return
This feature returns a station to the idle state after
3 seconds of reorder tone is received due to the
distant end disconnecting.
Called Station Status Display
This feature provides a display on the status of a
called station on the LCD of the calling Multiline
Terminal.
Calling Name and Number Display
This feature provides a display on the LCD of the
Multiline Terminal receiving a call, indicating the
station number or trunk number of the incoming
call.
Dynamic Dial Pad
This feature allows a user to make an outgoing
call by first pressing a key on the keypad of
Multiline Terminal without pressing the Speaker
key or going off-hook.
Handsfree Unit
The built-in Handsfree Unit enables full Handsfree
operation for both internal and external calls (No
optional Handsfree Unit is required).
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4