NEC NEAX 2000 IPS Reference Manual page 19

The illustration below shows a typical system layout.
NEAX 2000 IPS
MATWorX
(via RS232C)
DRS
Dterm IP
Switching
Hub
Client PC
Dterm IP
Client PC
Station to Station Connection
term term
For D IP to D
received directly between D
card and VCT card are required to transmit and receive the voice data. These cards are used to
control and convert the voice data. The MP card in either of the connections above manages the
.
control signals
CCIS Connection
term term
D IP to D IP connection (Peer to Peer connection) via CCIS is available only when the
destination office is NEAX 2000 IPS or NEAX 2400 IPX. The system provides only Point to
.
Multipoint connection
NEAX2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349, Issue 4
LC/DLC
IP-PAD
MP
Switching Hub (100Mbps
Dterm
INASET
IP connection (Peer to Peer connection), the voice data is transmitted and
term
IPs on the LAN. For D
PSTN
COT
IPT(H.323
H.323 GK
Handler)
Router
)
OAI
MATWorX
Router
Server
(via LAN)
Dterm SP30
term
Legacy terminal connection, the IP-PAD
Chapter 1 Introduction
NEAX 2000 IPS
MATWorX
(Via IPT:CCIS)
CCIS over IP
Internet
/Intranet
Router
NEAX IPS
Dterm
DHCP
Assistant
Server
Dterm IP
Remote PIM over IP
with Survivability
PSTN
DM
Page 1-13