NEC NEAX 2000 IPS Reference Manual page 368

Chapter 16 Wireless System
The PMS can send the following information to the PBX:
1. Maid Status
2. Message Waiting Lamp Status Changes
3. Telephone Restriction Status Changes
4. Check-In/Out Messages
5. Room Data Image Inquiry
6. Wake-Up Status Changes
7. Room Change, Room Swap and Room Copy
8. Room Occupancy and Room Data Change
9. Status inquiry for routine activity checks
10. Guest Name and Guest Information to be displayed on Administration Station, Front Desk
Instrument or Attendant Console
Note: Room copy and Guest Room Information is available only when MP built-in PMS over IP is provided.
Room Cutoff
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument, or Property
Management System (PMS) terminal, or guest room telephones using a special access code, to
temporarily restrict guest room telephones from making unauthorized calls when guests are away from
their room, and when rooms are in Check Out status. There are two types of Room Cutoff conditions
depending on the type of calls restricted.
External Call Restriction: All outgoing calls from guest room stations are restricted in the Room
Cutoff status.
Toll Call Restriction: All toll calls from guest room stations are restricted during Room Cutoff
status. (Internal and local calls are available.)
Stations in Room Cutoff condition are able to place outgoing calls using the Attendant Assisted Calling
feature. If the station under Room Cutoff status dials a C.O. line access code and/or a special area
code, the station is rerouted to one of the following
Reorder tone
Attendant Console
Room Cutoff is automatically set by Check Out operation and it is automatically reset by Check In
operation. Station-to-station calling and service feature access (such as Maid Status) are still available.
Room Cutoff Console
This feature allows a DSS/BLF Console associated with a Multiline Terminal to be used as a Room
Cutoff Console. This feature is activated by the use of a Function Mode key on a DSS/BLF Console.
The Room Cutoff status for each station is indicated by a green LED associated with each button. In
addition, the Multiline Terminal user can set/cancel Room Cutoff to another station using the Room
Cutoff Console.
The Room Cutoff Console only displays/cancels the set status for those stations that were set into room
cutoff by the station user of the Room Cutoff Console. Indication is not provided when another Room
Cutoff console, the Attendant Console, a Hotel/Motel Front Desk Instrument, or a PMS changes the RC
status of a station.
Page 17-10
Note
Note
:
NEAX2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4