Home Position Return Automatic Return Function - Mitsubishi Electric MR-J2S-CP Instruction Manual

4. OPERATION

4.4.10 Home position return automatic return function

If the current position is at or beyond the proximity dog in the home position return using the proximity
dog, this function starts home position return after making a return to the position where the home
position return can be made.
(1) When the current position is at the proximity dog
When the current position is at the proximity dog, an automatic return is made before home position
return.
(2) When the current position is beyond the proximity dog
At a start, a motion is made in the home position return direction and an automatic return is made on
detection of the stroke end (LSP or LSN). The motion stops past the front end of the proximity dog,
and home position return is resumed at that position. If the proximity dog cannot be detected, the
motion stops on detection of the opposite LSP or LSN and home position return incomplete warning
(AL. 90) occurs.
Home position return direction
Makes an automatic return
to a position before the
proximity dog, then executes
home position return at this position.
Software limit cannot be used with these functions.
Home position return direction
Makes an automatic return
to a position before the
proximity dog, then executes
home position return at this position.
Proximity dog
Home position return
start position
Proximity dog
Home position return
start position
4 - 38
Stroke end
(LSP or LSN)