Mitsubishi Electric MR-J2S-CP Instruction Manual page 174

6. MR Configurator (SERVO CONFIGURATION SOFTWARE)
(1) Servo motor speed setting ( a) )
Enter a new value into the "Motor speed" input field and press the enter key.
(2) Acceleration/deceleration time constant setting ( b) )
Enter a new value into the "Accel/decel time" input field and press the enter key.
(3) Servo motor start ( c), d) )
Hold down the "Forward" button to rotate the servo motor in the CCW rotation direction.
Hold down the "Reverse" button to rotate the servo motor in the CW rotation direction.
(4) Servo motor stop ( e) )
Release the "Forward" or "Reverse" button to stop the rotation of the servo motor.
(5) Jog operation window closing ( f) )
Click the "Close" button to cancel the jog operation mode and close the window.
6 - 13