Mitsubishi Electric MR-J2S-CP Instruction Manual page 322

15. COMMUNICATION FUNCTIONS
(9) Point table/deceleration time constant (Command [C][8])
Command Data No.
[0][1] to
[C][8]
[1][F]
(10) Point table/dwell (Command [C][A])
Command Data No.
[0][1] to
[C][A]
[1][F]
(11) Point table/auxiliary function (Command [C][B])
Command Data No.
[0][1] to
[C][B]
[1][F]
(12) External input signal disable (Command [9][0])
Command Data No.
[9][0] [0][0]
[9][0] [0][3]
[9][0] [1][0]
[9][0] [1][3]
(13) Operation mode selection (Command [8][B])
Command Data No.
[8][B] [0][0]
Deceleration time constant write
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Dwell write
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Auxiliary function write
The decimal equivalent of the data No. value
(hexadecimal) corresponds to the Point table No.
Turns off the input devices, external analog input signals
and pulse train inputs with the exception of EMG, LSP and
LSN, independently of the external ON/OFF statuses.
Disables all output devices (DO).
Enables the disabled input devices (DI), external analog
input signals and pulse train inputs with the exception of
EMG, LSP and LSN.
Enables the disabled output devices (DO).
Operation mode changing
0000: Exit from test operation mode
0001: Jog operation
0002: Positioning operation
0003: Motor-less operation
0004: Output signal (DO) forced output
Description
Description
Description
Description
Description
15 - 15
Setting range Frame length
0 to 20000
8
Setting range Frame length
0 to 20000
8
Setting range Frame length
0, 1
8
Setting range Frame length
1EA5
4
1EA5 4
1EA5
4
1EA5 4
Setting range Frame length
0000 to 0004
4