Battery (Mr-Bat, A6Bat) - Mitsubishi Electric MR-J2S-CP Instruction Manual

14. OPTIONS AND AUXILIARY EQUIPMENT
(4) Mounting
Panel cutting
(5) Outline dimension drawing
(0.63)(0.787) (1.063

14.1.9 Battery (MR-BAT, A6BAT)

Use the battery to build an absolute position detection system.
3- 4.8(0.189)
equally divided
3.6(0.142)
Packing t2.0
27.0
0.5
16 20
0.02)
POINT
The revision (Edition 44) of the Dangerous Goods Rule of the
International Air Transport Association (IATA) went into effect on
January 1, 2003 and was enforced immediately. In this rule, "provisions of
the lithium and lithium ion batteries" were revised to tighten the
restrictions on the air transportation of batteries. However, since this
battery is non-dangerous goods (non-Class 9), air transportation of 24 or
less batteries is outside the range of the restrictions. Air transportation of
more than 24 batteries requires packing compliant with the Packing
Standard 903. When a self-certificate is necessary for battery safety tests,
contact our branch or representative. For more information, consult our
branch or representative. (As of September, 2007).
3-M4 stud L10
P.C.D.72 equally divided
5V to
12V 0V A B
8.89 7.6(0.299)
(0.35)
14 - 33
[Unit: mm(in)]
[Unit: mm(in)]
M3 6 may only be used.