Adjusting The Picture Quality (Picture Adjust) - Denon AVR-4310 Owner's Manual

Setting items
Manual EQ Curve Copy : Copy "Audyssey Flat" curve from MultEQ XT.
(Continued) Yes : Copy.
No : Do not copy.
"Curve Copy" is displayed after the Audyssey Auto Setup procedure
has been performed.
Default : Reset the settings to the default values.
• Yes : Reset.
• No : Do not Reset.
RESTORER OFF : Do not use RESTORER.
This function restores Mode 1 (RESTORER 64) : Optimized mode for compressed sources with
compressed audio signals very weak highs.
to how they were before Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all
compression and corrects the compressed sources.
sense of volume of the bass Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with
and treble to obtain richer normal highs.
playback sound.
• This can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the input mode is set to "EXT. IN" or when the
surround mode is set to "DIRECT".
• The default setting for "iPod" and "NET/USB" are "Mode 3". All others
are set to "OFF".
• When set to something other than "OFF", "
• This can also be set by pressing
• Such compressed audio formats as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring
the sound to conditions near those of the original sound before
compression. It also corrects the sense of volume of the bass to obtain
richer sound with compressed audio signals.
• This is displayed on the GUI menu and can be set when the input
source is set to "NET/USB", or when analog signals (including FM/AM
signals) or PCM signals (fs = 44.1/48 kHz) are input.
Main remote control
operation buttons
Setting contents
" is displayed.
[RESTORER]
during playback.
OFF Mode 1 Mode 2
(RESTORER 64) (RESTORER 96)
Mode 3
(RESTORER HQ)
About the RESTORER function
:Displaying the menu
Cancel the menu
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
Audio Delay 0ms ~ 200ms
While viewing video,
manually adjust the time to
delay audio output. • This can be set within the range of 0 to 100 ms when "Auto Lip
Sync" is set to "ON" and when a TV compatible with Auto Lipsync is
connected.
• Store "Audio Delay" for each input source.

Adjusting the Picture Quality (Picture Adjust)

• This can be set when the input source is DVD
With input sources other than the ones above, this can be set when "Video Select" is selected. In this
b
case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 48) is "ON".
Setting items
Contrast –6 ~ +6 (0)
Adjust picture contrast.
0 ~ +12
Brightness
Adjust picture brightness.
Chroma Level –6 ~ +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 ~ +6 (0)
Adjust color hue.
DNR OFF / Low / Middle / High
Reduce overall picture
noise.
Enhancer 0 ~ +12
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Setting contents
Default settings are underlined.
HDP TV SAT/CBL VCR DVR V.AUX
Setting contents
See overleaf
:Return to previous menu
ENGLISH
NET/USB .