Relationship Between The Video Input Signal And Monitor Output According To The Video Convert Mode Settings Of Main Zone - Denon AVR-4806 Operating Instructions Manual

ENGLISH
System Setup
• It is not possible to down-convert from HDMI/DVI input signals to
the component, S-Video or composite video monitor output
terminals.
• Video down conversion to the MAIN ZONE's monitor output is only
possible when the component video input resolution is 480i
(interlaced standard definition video – NTSC format, for North
America) or 576i (interlaced standard definition video – PAL format,
for Europe and other countries).
¢ The analog video to HDMI conversion function
• The AVR-4806's video up-conversion function lets you output
analog video input signals (component – 480i/576i, 480p/576p,
1080i or 720p; S-Video and composite video - 480i/576i) to the
HDMI monitor output terminal.
• With the AVR-4806, the resolution of the signal output to the
HDMI MONITOR OUT terminal can be selected (
The resolutions with which the monitor is compatible can be
checked using < STATUS > or [ON SCREEN].
• If you do not want to use the function for converting analog video
signals to HDMI signals, select "OFF" for "Analog to HDMI
Convert" at "Setting the HDMI Out Setup" (
In this case, the function for video up conversion to the component
video terminal operates.
Relationship between the video input signal and monitor output according to the video convert mode
settings of MAIN ZONE
Video convert
HDMI
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
E E
page 4, 5).
E E
E E
E E
ON
C C
C C
C C
C C
C C
page 4, 5).
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C
C C : Signal input
E E : No signal
480p ~ 720p : 480p/576p/1080i/720p
• The MAIN ZONE video conversion function is compatible with the following
format: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60.
• When SECAM signals of video input are up-converted, the signals are
output in PAL format from the S-Video connector.
• When the input signal is set to component video 1080p, the signals cannot
be output to the HDMI monitor output terminal.
Input signals
COMPONENT S-VIDEO VIDEO
E E E E E E
E E E E C C
E E C C E E
E E C C C C
C C (1080p) E E E E
C C (480p ~ 720p) E E E E COMPONENT
C C (480i/576i) E E E E COMPONENT
C C (1080p) E E C C
COMPONENT ✳1
C C (480p ~ 720p) E E C C
COMPONENT ✳1
C C (480i/576i) E E C C
C C (1080p) C C E E
COMPONENT ✳2
C C (480p ~ 720p) C C E E
COMPONENT ✳2
C C (480i/576i) C C E E
C C (1080p) C C C C
COMPONENT ✳2
C C (480p ~ 720p) C C C C
COMPONENT ✳2
C C (480i/576i) C C C C
E E E E E E
E E E E C C
E E C C E E
E E C C C C
C C (1080p) E E E E
C C (480p ~ 720p) E E E E
C C (480i/576i) E E E E
C C (1080p) E E C C
C C (480p ~ 720p) E E C C
C C (480i/576i) E E C C
C C (1080p) C C E E
C C (480p ~ 720p) C C E E
C C (480i/576i) C C E E
C C (1080p) C C C C
C C (480p ~ 720p) C C C C
C C (480i/576i) C C C C
E E
✳1
✳2
✳3
✳4
✳5
3
ENGLISH
MONITOR OUT
HDMI COMPONENT S-VIDEO
E E E E E E
VIDEO VIDEO VIDEO
S-VIDEO S-VIDEO S-VIDEO
S-VIDEO S-VIDEO S-VIDEO
E E COMPONENT E E
COMPONENT E E
COMPONENT COMPONENT
COMPONENT ✳1
VIDEO VIDEO
COMPONENT ✳1
VIDEO
COMPONENT ✳1 COMPONENT ✳1
COMPONENT ✳2
S-VIDEO S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
E E E E
HDMI
✳2
VIDEO
HDMI VIDEO
✳2
S-VIDEO
HDMI S-VIDEO
✳2
HDMI S-VIDEO S-VIDEO
HDMI COMPONENT E E
E E
HDMI COMPONENT
HDMI COMPONENT COMPONENT
✳1 COMPONENT ✳1
HDMI
VIDEO
✳1 COMPONENT ✳1
HDMI VIDEO
✳1 COMPONENT ✳1 COMPONENT ✳1
HDMI
✳2 COMPONENT ✳2
HDMI
S-VIDEO
✳2 COMPONENT ✳2
HDMI
S-VIDEO
✳2 COMPONENT ✳2
HDMI S-VIDEO
✳2 COMPONENT ✳2
HDMI S-VIDEO
✳2 COMPONENT ✳2
HDMI S-VIDEO
✳2 COMPONENT ✳2
HDMI
S-VIDEO
: Not output
: On screen display superimposed on video signal and output.
: On screen display superimposed on S-Video signal and output.
: Video signals are not output when the analog to HDMI convert function is
set to "ON".
: When the analog to HDMI convert function is set to "ON", the component
video input signals are converted before being output.
: When the analog to HDMI convert function is set to "ON", video input
signals are output.
: On screen display only displayed for SYSTEM SETUP, SURROUND
PARAMETER and [ON SCREEN].
: When "OFF" is selected for the "Analog to HDMI Convert" setting, no
video signals other than the HDMI input signal are output.
: Including the contents of and above.
System Setup
VIDEO
E E
VIDEO
S-VIDEO
S-VIDEO
E E
E E
COMPONENT
VIDEO
✳3
VIDEO
VIDEO
S-VIDEO
✳3
S-VIDEO
✳4
S-VIDEO
S-VIDEO
✳5
S-VIDEO
✳5
S-VIDEO
E E
VIDEO
S-VIDEO
S-VIDEO
E E
E E
COMPONENT
VIDEO
✳3
VIDEO
VIDEO
S-VIDEO
✳3
S-VIDEO
✳4
S-VIDEO
S-VIDEO
✳5
S-VIDEO
✳5
S-VIDEO