Initiating The Fax Connection Manually (Manual Fax Reception) - Kyocera KM-C2520 Operation Manual

Initiating the Fax Connection Manually (Manual Fax Reception)

Once you are connected with the other party, reception can be initiated manually by pressing the
Start key. Use this mode when you want to talk to the other party prior to actual reception of the
documents.
NOTE: Conversation with the other party is only possible if a separately purchased telephone is
connected to this fax machine.
Auto Fax Reception is the default setting in this fax, so, in order to manually initiate reception, it is
usually necessary to change the reception mode to Manual Fax Reception.
Preparation
Make sure that [Manual RX] is
displayed. If it is not, press the reception
mode select key and then press the
[Manual RX] key.
1
When a call comes in, the separately purchased phone
will ring.
2
Pick up the telephone receiver.
3 Check whether or not the call is from a fax.
> If you hear a fax tone...
You are connected to a fax machine.
Press the Start key. Fax reception will begin.
NOTE: If the separately purchased telephone has
tone dialing capabilities, you can use the Remote
Switching function. (Refer to Initiating Fax Reception
From A Connected Telephone (Remote Switching) on
page 5-8.)
Fax Operation (Various Functions)
for fax transmission.
riginal & assign destination.
TX
Abbrev.
setting
Application
Register
Memory usage:
OCT-11-2005 16:00
Dest.
check
Re-dial
On-hook
Memory TX
Manual RX
Print Report
.0%
3-25