Kyocera KM-C2520 Operation Manual page 215

NOTE: If you want to register the file name, go to step 3.
If you want to register the IP address or host name, go to step 7.
If you want to register the administrator's e-mail address, the account name and password for
SMTP authorization, go to step 10.
If you want to register the save folder number, go to step 22.
> Registering the file name (factory default setting: [RX] and [TX])
3 Press the [File name] key.
4
If you want to register the file name for received faxes, press the [NetworkFAX Rx.] ([NW-FAX RX])
key. If you want to register the file name for transmitted faxes, press the [Save Tx. original] key.
NOTE: The procedure to register the name is the same for both received faxes and transmitted
faxes.
5 Enter the desired name using the English alphabet, numerals or other available symbols. (Maximum
13 digits)
NOTE: Refer to Entering Characters on page 2-15 when entering the file name.
6
Once you are finished entering the file name, press the [End] key. The message display will return
to the same screen as was displayed in step 3.
> Registering the IP address or host name
7 Press the [IP addr./Host name] key.
8 Enter the IP address (numerals) or the host name (using the English alphabet or numerals).
(Maximum 32 digits)
NOTE: Refer to Entering Characters on page 2-15 when entering the IP address or host name. It is
not possible to use the [Space] key when entering this information.
9 Once you are finished entering the IP address or host name, press the [End] key. The message
display will return to the same screen as was displayed in step 3.
Register Network FAX.
Regist'd contents cnf
Receive: rx
File name
Transmit: tx
IP addr./
Host name
Admin.
E-mail ad.
Register Network FAX.
Regist'd contents cnf
Receive: rx
File name
Transmit: tx
IP addr./
Host name
Admin.
E-mail ad.
Network FAX Settings
Saving Receive
Folder No. Transm
Saving Receive
Folder No. Transm
9-9