Deleting Destinations; Adding Destinations - Kyocera KM-C2520 Operation Manual

3
Enter the F-Code password (4-digits) for
that F-Code Relay Box.
4 Press the [Confirm] key.
5 If you want to completely delete the
F-Code Relay Box, press the [Delete]
key and go to the next step. If you want
to modify the information for that F-Code
Relay Box, press the [Change contents]
key and go to step 7.
> Deleting an F-Code Relay Box
6
Press the [Yes] key. The message display will return to the same screen as was displayed in step 2.
If you are finished deleting F-Code Relay Boxes, press the Reset key.
> Modifying information
7
If you want to change the final destination fax numbers, press the [
you want to modify any other basic information, press the key that corresponds to that information
and refer to Registering New F-Code Relay Boxes on page 5-26.

Deleting destinations

8 Press the destination that you want to
delete until it is highlighted. Multiple
selections are available. If the
destination you want to delete is not
displayed, use the [ ] and/or [ ] cursor
keys to switch to the screen that displays
the destination that you want.
9
To delete the selected destination(s), press the [Delete] key and then the [Yes] key.

Adding destinations

10 Press the [Add] key.
Register box
Subaddress relay box 01.
Password confirmation
Enter password using # key.
_.
( 4 digits)
Register box
Subaddress relay box 01.
Contents change/del.
Subaddress 3333.
Password 3333.
Change
contents
Register box
Subaddress relay box 01.
Add/change/del des.
0002. *0002.
12345678 .
x
relay box 01.
el des.
*0002.
12345678 .
Other Features of this Fax
Back
Back
Delete
] key and go to the next step. If
Back
1/1.
Memory usage:
OCT-11-2005 16:00
Back Close
Add
Change
Delete
1/1.
Memory
OCT-11
.0%
5-29