Speaker Volume; Making Volume Settings (Volume Setting) - Kyocera KM-C2520 Operation Manual

Making Volume Settings (Volume setting)

The volume of the alarm, the monitor and the speaker can be adjusted here, or you can make the
alarm inaudible.
Alarm Volume
Sets the volume of the alarm that sounds in the event of an error or when you press an incorrect key
on the operation panel.
Monitor Volume
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line
when the [On-hook] key was NOT pressed.

Speaker Volume

Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line
when the [On-hook] key WAS pressed.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Press the System Menu/Counter key. The System
Menu / Counter screen will appear.
2 Press the [Fax Default] key.
3
Press the [ ] cursor key until Set Volume (Set the sound volume) is highlighted.
4 Press the [Change #] key.
5 Select the desired alarm volume from
among Large, Small and Off.
Various Settings and Registration
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
System Menu / Counter
Set Volume
Buzzer Volume Monitor Volume Speaker Volume
Large Large Large
Small Medium Medium
Off Small Small
Off
Off Off
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back
7-7