Manual Fax Reception - Kyocera KM-2030 Instruction Handbook Manual

Manual Fax Reception

Once you are connected with the other party, reception can be
initiated manually by pressing the Start key.
Use this mode when you want to talk to the other party prior to
actual reception of the documents.
Preparation
• Inch version: Raise the cover plate and press the TAD/Auto Rx.
key until both the TAD and Auto Rx. indicators are out.
• Metric version: Raise the cover plate and press the MESSAGE
TEL./MANUAL RX. key to light the MANUAL RX. indicator.
(Inch)
1. When a call comes in, the separately purchased phone will ring.
2. Pick up the telephone receiver.
2-20
* Manual Fax Reception is only possible if a separately
* Auto Fax Reception is the default setting in this fax, so,
3. Check whether or not the call is from a fax.
(Metric)
4. Hang up the receiver once the reception begins.
Section 2 Various Functions of this Fax
purchased telephone is connected to this fax machine.
in order to manually initiate reception, it is usually necessary to
change the reception mode to Manual Fax Reception.
> If you hear a fax tone...
You are connected to a fax machine.
Press the Start key. Fax reception will begin.
(Inch)
> If the other party's voice can be heard...
You are connected to a telephone.
Press the Start key at the end of the conversation to initiate
reception. Fax reception will begin.
(Metric)