Turning Remote Diagnosis On/Off (Remote Diagnosis Setting) - Kyocera KM-C2520 Operation Manual

Various Settings and Registration

Turning Remote Diagnosis ON/OFF (Remote Diagnosis setting)

Especially if trouble occurs in this fax in which it is necessary to call for service, it is possible for our
service center computer to access the fax directly over the telephone line and check its status and
other information about the trouble.
NOTE: To use Remote Diagnosis, it is necessary to enter into a contract with an authorized service
center in advance and also to register a predetermined Remote Test ID in advance. (Refer to
Registering the Remote Test ID (Remote Test ID setting) on page 7-21.) For further information,
contact your service representative, an authorized service center or the place of purchase.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Press the System Menu/Counter key. The System
Menu / Counter screen will appear.
2 Press the [Fax Default] key.
3
Press the [ ] cursor key until Remote Diag. (Remote diagn.) is highlighted.
4 Press the [Change #] key.
5 Select whether you want to turn Remote
Diagnosis ON or OFF by pressing either
the [On] or [Off] key, as appropriate.
6
Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
7-20
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
System Menu / Counter
Remote Diag.
On
Off
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back