Kyocera KM-C2520 Operation Manual page 233

U03600
U03700
U04000
U04100
U04200
U04300
U04400
U04401
U04500
U05100
U05200
U05300
U09000
U12000
U14000
The transmitting party's FAX is one of our models and an F-Code
Based Bulletin Board Reception was attempted in order to receive
documents from that party's F-Code Box, but was unsuccessful
because the F-Code password that you entered did not match the one
registered in the transmitting party's FAX.
An F-Code Based Bulletin Board Reception was attempted in order to
receive documents from the other party, but was unsuccessful
because the other party's FAX does not have F-Code Based Bulletin
Board Transmission capabilities or because there were no documents
stored in the corresponding box.
The destination FAX is one of our models and an F-Code Based
Confidential Transmission was attempted in order to transmit
documents to that party's F-Code Box, but was unsuccessful because
the F-Code Box number that you entered was not registered in the
destination party's FAX.
A transmission to a destination party's box (ex. F-Code Box) was
attempted, but was unsuccessful because the destination party's FAX
does not have F-Code Based Confidential Reception capabilities.
Encryption Transmission was attempted, but was unsuccessful
because the Encryption Box was not registered in the other party's
FAX.
Encryption Transmission was attempted, but was unsuccessful
because the other party's FAX does not possess Encryption
Communication capabilities.
Encryption Transmission was attempted, but was unsuccessful
because the Encryption Keys did not match.
Encryption Transmission was attempted, but the other party was not
dialed because the designated Encryption Key is not registered in your
unit.
Encryption Reception was attempted, but was unsuccessful because
the Encryption Keys did not match.
Transmission was attempted, but was unsuccessful because TX/RX
Restriction was turned ON in your unit and the necessary password
did not match. Check with the destination party.
A transmission was attempted by the other party, but was
unsuccessful because TX/RX Restriction was turned ON in your unit
and the necessary password did not match.
Transmission was attempted, but was unsuccessful because TX/RX
Restriction was turned ON in the destination party's FAX and the
necessary password did not match. Check with the destination party.
Communication was attempted but, but was unsuccessful because the
other party's FAX does not match the communication protocol in use
(the other party is using a G2 facsimile).
An F-Code Based Relay Broadcast Transmission command was
received, but all the data to be transmitted was not received because
the memory in your FAX machine has become full. Check the contents
of your machine's memory and, after you have created sufficient
space in memory, have the initial transmitting station perform the
transmission operation again.
A reception from an F-Code box was attempted, but was unsuccessful
because the memory in your FAX machine has become full. Print out
data from memory and try again or abandon the F-Code Based
Confidential Reception attempt.
Reference Information
10-13