Using Fax Server To Send A Fax (Fax Server Transmission); Configuring Settings Before Sending; Using Fax Server To Send A Fax - Kyocera ECOSYS M3645idn Operation Manual

Operation on the Machine > Using fax server to send a fax (fax server transmission)
Using fax server to send a fax (fax server
transmission)
You can send a scanned document through a fax server.
NOTE
To use this function, you must have a fax server. For information on your fax server, ask your administrator.

Configuring Settings before Sending

Before sending a fax, the following setting is required.
FAX Server Settings (page 8-45)
Command Center RX User Guide

Using fax server to send a fax

1
2
3
4
[Home] key > [Send]
Place the originals.
Loading Originals (page 5-2)
In the basic screen for sending, select [FAX Server].
Specifying destination.
Entering the destination fax number with the numeric keys
1
Select [FAX Number Entry].
2
Enter the fax number.
NOTE
Use the numeric keys to enter a number.
3
Select [OK].
Destinations can be changed later.
Confirmation Screen of Destinations (page 5-26)
5-34