Registering New Reject Fax Numbers - Kyocera KM-C2520 Operation Manual

Other Features of this Fax
2
Press the key which displays the Permit
ID you want to modify or delete.
3 If you want to delete the registered
Permit ID, press the [Delete] key and
then go to the next step. If you want to
modify the registered information, press
the [Change contents] key and then go
directly to step 5.
> Deleting a Permit ID
4
Press the [Yes] key.
The message display will return to the same screen as was displayed in step 2. If you are finished
deleting Permit IDs, press the Reset key.
> Modifying information
5 Press the Stop/Clear key to delete the
old number and then enter the new
Permit ID, or use the [ ] and/or [ ] keys
to move the cursor to a desired location
and reenter the number as desired.
6 Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 2. Once you are finished modifying and/or deleting Permit IDs, press the Reset key.

Registering New Reject Fax Numbers

NOTE: You can register up to 5 numbers as Reject Fax Numbers in this fax.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Press the [Register] key. The Register
screen will appear.
5-54
Register in TX/RX Restriction list.
Permit List
#01 0101.
#02 0202.
#03
Register in TX/RX Restriction list.
Permit ID No. 1.
Contents change/del.
0101.
Change
contents
Register in TX/RX Restriction list.
Permit ID No. 1.
Detail contents
Enter using # key.
0101.
( 4 digits)
Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
#04
#05 5555.
Back
Delete
Back
Register Print Report
Memory
OCT-11