Kyocera KM-C2520 Operation Manual page 64

Fax Operation (Basic Use)
2
If you want to change the transmission conditions, such as the resolution and contrast, press the
[TX setting] key.
If you do NOT want to change the current conditions, go directly to step 5.
3
Press the key that corresponds to the desired item and change the information as desired. (To
change each transmission condition, refer to pages 2-5 and 2-6.)
4 Once you are finished changing
transmission conditions, press the
[Address book] key and go directly to
step 6.
5 Press the [Address book] key.
6 On the touch panel, press the first letter of the name that you want to search for.
If the first character is a symbol
Press the [Others] key. The message
display will change to show a list of
names that are registered with a symbol
as the first character.
7 The speed-dial keys that are registered
with a name that starts with that first
letter will be displayed.
8
Press the speed-dial key under which the desired destination is registered.
NOTE: If that key is not displayed, use the [ ] and/or [ ] cursor keys to switch to the screen that
displays the key that you want.
9
Press the [OK] key.
The touch panel will return to the basic fax screen.
2-28
Ready for fax transmission.
Enter Destination.
Dest
One touch Save Tx.
destinat. original
Abbrev. Delayed TX 8½×11"
Address Duplex Orig. size
book TX setting
Basic Application
Ready for fax transmission.
Enter Destination.
Dest
ABC.
Address TX
Abbrev.
book setting
Basic Application
Ready for fax transmission.
Searching.
Select first letter of destination.
Ready for fax transmission.
Search: A
Set destination.
ABC
AMC
Normal Light
Orig image Exposure
quality mode
Register Print Report
Register Print Report
Back
1/1.
Memory
OCT-11
Memory
OCT-11
Memory
OCT-11
Possi
Others
Memory
OCT-11