Kyocera KM-C2520 Operation Manual page 69

4
Press the [Duplex TX] key.
5 Press the [On] key to enable Duplex Transmission.
6 Select whether or not you want to
include a 1-sided cover page with the
transmission by pressing either the [Yes]
key or the [No] key, as appropriate.
• If you want to send a 1-sided document as a cover sheet to the rest of the 2-sided documents,
select [Yes]. In this case, the fax will transmit the documents WITHOUT scanning the back side
of the first page.
• If you want to transmit the 2-sided documents WITHOUT a cover page, select [No].
7
Select whether or not you want the image on the back side of the documents to be inverted during
transmission to match the orientation of the front side by pressing either the [On] key (invert rear
images) or the [Off] key (do NOT invert images), as appropriate.
• If you transmit documents as shown in
the illustration at right, select [On]. The
fax will then invert the image of the rear
side of each document in memory 180°.
• If you transmit documents as shown in
the illustration at right, select [Off].
8
Press the [Close] key.
Fax Operation (Various Functions)
Ready for fax transmission.
Press start key to transmit
Dest 1234_.
Delete Pause
One touch
destinat.
8½×11"
Abbrev. Delayed TX
Address Duplex Orig. size
book TX setting
Basic Application
Ready for fax transmission.
Duplex TX
Cover page
Off Yes
On No
Scanning
Direction of
document feed
Scanning
Direction of
document feed
Space Subadd.
Normal Regular
Orig image Exposure
quality mode
Register Print Report
Back
Top binding
On
Off
Printout at the
destination fax
Printout at the
destination fax
Memory
OCT-11
Next des
Memory
OCT-11
3-3