Using Fax Server To Send A Fax (Fax Server Transmission) - Kyocera ECOSYS MA4500fx Operation Manual

Operation on the Machine > Using fax server to send a fax (fax server transmission)
Using fax server to send a fax
(fax server transmission)
You can send a scanned document through a fax server.
NOTE
• A fax server is required to use this function. For information about the fax server, contact the applicable
administrator.
• FAX server settings must be configured to send a FAX.
FAX Server Settings (page 8-25)
Command Center RX User Guide
1
Select the [Send] key.
2
Place the originals.
Place the originals.
Loading Originals (page 5-2)
3
key > [FAX Server] > [OK] key
[ ] [ ]
4
Specifying destination.
Entering the destination fax number with the numeric keys
1 Select [Fax No. Entry].
2 Enter the fax number.
NOTE
Use the numeric keys to enter a number.
3 Select [OK] key.
Destinations can be changed later.
Checking and Editing Destinations (page 5-31)
5-26