Using A Fax Server To Send (Fax Server Send) - Kyocera 3508ci Operation Manual

Operation on the Machine > Using a Fax Server to Send (Fax Server Send)
Using a Fax Server to Send (Fax Server
Send)
You can send a scanned document via a fax server.
NOTE
• A fax server is required to use this function. For information about the fax server, contact the applicable
administrator.
• FAX server settings must be configured to send a FAX.
Embedded Web Server RX User Guide
Fax Server (page 8-68)
1
2
3
4
[Home] key > [Send]
Place the originals.
Loading Originals (page 5-2)
Display the screen.
In the destination screen for sending, select [+] > [Fax Server]
Enter recipient information.
Entering Information Directly
1
Select [Fax No. Entry].
2
Enter the fax number > [OK]
NOTE
Use the numeric keys to enter a number.
Destinations can be changed later.
Checking and Editing Destinations (page 5-50)
Selecting from the Address Book
1
Select [Address Book].
2
Specify the destination > [OK]
Choosing from the Address Book (page 5-47)
Destinations can be changed later.
Checking and Editing Destinations (page 5-50)
5-44