C H A P T E; Configuring Ipv4 Acls; Finding Feature Information; Prerequisites For Configuring Network Security With Acls - Cisco Catalyst 2960-XR Security Configuration Manual
Ios release 15.0 2 ex1
Hide thumbs
Also See for Catalyst 2960-XR:
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring IPv4 ACLs
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Configuring Network Security with ACLs
This section lists the prerequisites for configuring network security with Access Control Lists (ACLs).
• On switches running the LAN base feature set, VLAN maps are not supported.
Restrictions for Configuring Network Security with ACLs
General Network Security
The following are restrictions for configuring network security with ACLs:
OL-29434-01
Finding Feature Information, page 105
Prerequisites for Configuring Network Security with ACLs, page 105
Restrictions for Configuring Network Security with ACLs, page 105
Information about Network Security with ACLs, page 107
How to Configure ACLs, page 120
Monitoring IPv4 ACLs, page 139
Configuration Examples for ACLs, page 140
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
10
C H A P T E R
105
Advertisement
Table of Contents
