Intel 852GM Design Manual page 2

Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended
for use in medical, life saving, or life sustaining applications.
Actual system-level properties, such as skin temperature, are a function of various factors, including component placement, component power
characteristics, system power and thermal management techniques, software application usage and general system design. Intel is not responsible for its
customers' system designs, nor is Intel responsible for ensuring that its customers' products comply with all applicable laws and regulations. Intel
provides this and other thermal design information for informational purposes only. System design is the sole responsibility of Intel's customers, and
Intel's customers should not rely on any Intel-provided information as either an endorsement or recommendation of any particular system design
characteristics.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future
definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The Mobile Intel® Pentium® 4 Processor-M , Intel® Celeron® Processor, Intel ® Celeron M® Processor and Intel 852GM Chipset may contain design
defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on
request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
2
I C is a 2-wire communications bus/protocol developed by Philips*. SMBus is a subset of the I
2
Implementations of the I C bus/protocol may require licenses from various entities, including Philips* Electronics N.V. and North American Philips
Corporation.
Alert on LAN is a result of the Intel-IBM Advanced Manageability Alliance and a trademark of IBM*.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from:
Intel Corporation
www.intel.com
or call 1-800-548-4725
Intel, Intel logo, Pentium, Intel SpeedStep, and Intel NetBurst are registered trademarks or trademarks of Intel Corporation and its subsidiaries in the
United States and other countries.
*Other brands and names are the property of their respective owners.
Copyright © Intel Corporation 2003-2005
2
2
C bus/protocol and was developed by Intel.
®
Intel 852GM Chipset Platform Design Guide
R