Table of Contents
Advertisement
17. Plug all peripheral devices and the AC power cable into the server.
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Place the server board into the server system as shown by letter "A" in Figure 58.
7. Attach the server board with nine screws. See letter "B" in Figure 58.
64
iii.
24.
27.
55.
B
Figure 58. Installing the Server Board
®
Intel
Server System SR1530SH/SR1530HSH User's Guide
"Removing the Server
"Removing the Processor Air
"Removing the PCIe*
A
"Safety
AF002332
Advertisement
Table of Contents
