Table of Contents
Advertisement
6. Remove the three screws that hold the fan bracket in place. Save these screws. You
will re-install them later. See letter "A" in Figure 73.
7. Remove the fan cable from beneath the clip at the front of the fan bracket. See letter
"B" in Figure 73.
8. Lift the fan bracket from the server. Lift the bracket at an angle, front of the bracket
first, to clear the hard disk drive brackets. See letter "C" in Figure 73.
Figure 73. Removing Bracket and System Blower Fans from Server System
80
A
B
(SR1530SH)
®
Intel
Server System SR1530SH/SR1530HSH User's Guide
C
AF002482
Advertisement
Table of Contents
