Hardware Requirements; Processor; Memory - Intel SR1530HSH - Server System - 0 MB RAM User Manual

Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the
following requirements outlined. For a list of qualified components, see the links under
"Server System

Processor

Supports Intel
and Intel
For a complete list of supported processors, see the links under
References" on page

Memory

The Intel
two banks, bank 1 and bank 2. Bank 1 consists of DIMM sockets A1 and B1. Bank 2
consists of DIMM sockets A2 and B2.
A minimum of one 512-MB DIMM is required in DIMM socket A1. This uses single-
channel interleave. However, for dual-channel interleave, providing optimum
performance, you should install a minimum of two DIMMs in DIMM sockets A1 and A2.
To operate in dual-channel dynamic paging mode, the following conditions must be met:
•
Populate two identical DIMMs in sockets DIMMA1 and DIMMB1.
•
Populate four identical DIMMs in each socket location.
Note: Installing only three DIMMs is not supported. Use DIMMs that are the same type and
speed. Use of identical DIMMs is preferred.
DIMMs must meet the following requirements:
•
Use only DIMMs with DDR2 DRAM technology.
•
Use only DDR2-667 and DDR2-800 stacked DIMM modules.
In determining your memory requirements, you must consider the need for memory
sparing or memory mirroring. For a complete list of supported memory DIMMs, see the
links under
14
References".
® ®
Xeon processor 3000 series and Intel
® ®
Xeon processor 3200 series and Intel
x.
®
Server System SR1530SH / SR1530HSH provides four DIMM sockets across
"Server System References" on page
®
Xeon
® ®
Xeon
x.
®
Intel Server System SR1530SH/SR1530HSH User's Guide
®
processor 3100 series,
processor 3300 series.
"Server System