Table of Contents
Advertisement
13. (Optional) Install the front bezel. For instructions, see
on page
14. Install the server system cover. For instructions, see
Cover".
Installing or Removing a Slimline Optical Drive
(SR1530HSH)
Caution: The optical drive is NOT hot-swappable. Before removing or replacing the optical drive,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
Installing a Slimline Optical Drive (SR1530HSH)
Note: The hardware necessary to install your optical drive was shipped to you in a bag labeled
"CD-ROM Assy".
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the bezel if it is installed. For instructions, see
Bezel" on page
5. First time installation only: Remove the peripheral knock-out by rocking it back
and forth.
6. Attach the optical drive attachment bracket as shown in Figure 47.
52
23.
iii.
24.
22.
Intel
"Installing the Front Bezel"
"Installing the Server System
"Removing the Server
®
Server System SR1530SH/SR1530HSH User's Guide
"Safety
"Removing the Front
Advertisement
Table of Contents
