Installing Dimms; Figure 21. Installing The Memory - Intel SR1530HSH - Server System - 0 MB RAM User Manual

Installing DIMMs

To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Locate the DIMM sockets. See Figure 21.
5. Make sure the clips at both ends of the DIMM socket(s) are pushed outward to the
open position. See letter "A" in Figure 21.
6. Holding the DIMM by the edges, remove it from its anti-static package.
7. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket. See letter "B" in Figure 21.
8. Insert the bottom edge of the DIMM into the socket. See letter "C" in Figure 21.
®
Intel Server System SR1530SH/SR1530HSH User's Guide
iii.
24.
C
D
A

Figure 21. Installing the Memory

"Removing the Server
B
DIMM 1A
Socket
DIMM 2A
Socket
"Safety
DIMM 2B
Socket
DIMM 1B
Socket
AF002309
31