Table of Contents
Advertisement
8. Install the replacement riser connector, if desired. For instructions, see
PCIe* Riser Card" on page
9. Install the PCIe* Riser assembly into the server system. For instructions, see
"Installing the PCIe* Riser Assembly" on page
10. Install the server system cover. For instructions, see
Cover".
11. Plug all peripheral devices and the AC power cable into the server.
Installing a PCIe* Riser Card
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System
4. Disconnect any cables attached to any add-in cards.
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Remove any add-in cards from the PCIe* Riser connector. For instructions, see
"Removing a PCI Add-in Card" on page
7. Use two screws to attach the riser card to the riser assembly. See Figure 54.
8. Install an PCI add-in card if desired. For instructions, see
Card" on page
9. Install the PCIe* Riser assembly into the server system. For instructions, see
"Installing the PCIe* Riser Assembly" on page
58
58.
iii.
Cover".
55.
Figure 54. Installing Riser Card onto Riser Assembly
59.
Intel
56.
"Installing the Server System
"Removing the Server
60.
56.
®
Server System SR1530SH/SR1530HSH User's Guide
"Installing a
"Safety
"Removing the PCIe*
AF001060
"Installing a PCI Add-in
Advertisement
Table of Contents
