The NIC LEDs at the right and left of NIC2 provide the following information:
LED
Left
Right
Peripheral Devices (SR1530SH)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Hard Disk Drive Bay HDD0 (located under the slimline optical drive bay)
•
Hard Disk Drive Bay HDD1
Peripheral Devices (SR1530HSH)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Hard Disk Drive Bay
Hard Disk Drives
The Intel
SATA ports are near the front left side of the server board. For instructions on installing
hard drives, see
Note: Each drive can consume up to 17 W of power. Drives must be specified to run at a
maximum ambient temperature of 45
Note: The Intel
(SATA) hard drives. See
list of supported hardware.
8
Table 4. NIC2 LED Descriptions
LED State
Off
Solid Green
Solid Amber
Off
Solid Green
Blinking Green
®
Server System SR1530SH/SR1530HSH provides six SATA ports. The six
"Installing and Removing a Hard Drive (SR1530SH)" on page
®
Server System SR1530SH / SR1530HSH does not support all Serial ATA
"Server System References" on page x
10 Mbps connection (if right LED is on or blinking)
100 Mbps connection
1000 Mbps connection
No network connection
Network connection in place
Transmit/receive activity
C.
°
Intelfi Server System SR1530SH/SR1530HSH User s Guide
Description
37.
for an Internet link to a