Table of Contents
Advertisement
7. Insert the replacement power supply at an angle into the server system, sliding the
power connector side in first to fit it through the cut-out area at the rear of the
system (see letter "A" in Figure 65).
8. Set the front of the power supply down pushing the power supply back so it fits
behind the foot at the bottom of the chassis (see letter "B" in Figure 65).
Figure 65. Installing Power Supply Module into the Server System
9. Connect the power supply cables to the server board and peripherals.
10. Install the server system cover. For instructions, see
Cover".
11. Plug all peripheral devices and the AC power cable into the server (see letter "C" in
Figure 65).
®
Intel
Server System SR1530SH/SR1530HSH User's Guide
A
B
(SR1530HSH)
"Installing the Server System
C
AF002478
73
Advertisement
Table of Contents
