Figure 45. Removing The Optical Drive Brackets; Figure 46. Installing The Pci Cooling Fan (Sr1530Sh) - Intel SR1530HSH - Server System - 0 MB RAM User Manual

9. Remove the four screws that hold the optical drive to the brackets as shown in
Figure 45. Save these screws for future use.
10. If you are installing a replacement optical drive, skip the rest of these steps and
instead continue with
11. Store the brackets for future use.
12. SR1530SH: Insert the PCI cooling fan onto the mounting pegs located behind the
optical drive bay (see letter "A" in
the system. Connect the fan cable to the connector on the server board (see letter
"B" in
®
Intel Server System SR1530SH/SR1530HSH User's Guide

Figure 45. Removing the Optical Drive Brackets

"Installing a Slimline Optical
Figure 46).

Figure 46. Installing the PCI Cooling Fan (SR1530SH)

Drive", Step 7 on page 47.
Figure 46). The fan label should face the rear of
A
AF000672
B
AF002328
51