Figure 49. Removing The Optical Drive From The System; Figure 50. Removing The Optical Drive From The Attachment Bracket - Intel SR1530HSH - Server System - 0 MB RAM User Manual

3. Remove the server system cover. For instructions, see
System Cover" on page
4. If it is installed, remove the bezel. For instructions, see
Bezel" on page
5. Remove the screws holding the drive in place (see letters "A" and "B" in Figure 49)
and slide the optical drive assembly out through the front of the chassis (see letter
"C" in Figure 49).
6. Remove the optical drive attachment bracket as shown in Figure 50.

Figure 50. Removing the Optical Drive from the Attachment Bracket

7. (Optional) Install the front bezel. For instructions, see
on page
8. Install the server system cover. For instructions, see
Cover".
54
24.
22.
C

Figure 49. Removing the Optical Drive from the System

23.
A
B
®
Intel Server System SR1530SH/SR1530HSH User's Guide
"Removing the Server
"Removing the Front
AF001635
A
AF001644
"Installing the Front Bezel"
"Installing the Server System