Figure 15. Removing Drive Cage Emi Shield From Fixed Drive Cage (Dp/Ws/Brp Configuration Shown) - Intel SC5650-DP Service Manual

5. Loosen thumb screw and remove the drive cage EMI shield (see letter "A" in the
following figure).
Figure 15. Removing Drive Cage EMI Shield from Fixed Drive Cage (DP/WS/BRP
6. Disconnect cables from any installed fixed hard drives. If necessary, remove hard
drives from fixed hard drive cage. For instructions on removing fixed hard drives, see
"Removing a Fixed Hard
®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
configuration shown)
Drive".
Hardware Installations and Upgrades
A
B
TP01869
19