Peripheral Bay; Hard Disk Drives; Interconnect System (Syscon) Board; Figure 8. Syscon Board - Intel TIGI2U - Carrier Grade Server User Manual

Server Platform Features

Peripheral Bay

One peripheral drive (either a slim-line CD-ROM drive or a slim-line DVD-ROM drive) can
be mounted in the system using a blind-mate peripheral drive carrier inserted into the
peripheral drive bay. The peripheral drive bay is located above the hard drive tray and to
the left.

Hard Disk Drives

The platform ships with two drive carriers for mounting hot swap Ultra320 SCSI hard disk
drives in the chassis.
For information on how to install these drives, see

NOTE
®
The Intel
hard drives. For a list of validated hard drive manufacturers and hard
drive types, see
http://support.intel.com/support/motherboards/server/TIGI2U
Drives can consume up to 17 watts of power each. Drives must be
specified to run at a maximum ambient temperature of 45 °C.

Interconnect System (SysCon) Board

The interface board is used in the CD-ROM drive carrier assembly as the signal and
power interface between the CD-ROM drive and the FPIO system board. The interface
board has standard IDE and power connectors for interfacing to the CD-ROM drive, and
has a high-density blind-mate connector for interfacing to the FPIO system board.
26
Carrier Grade Server TIGI2U does not support all SCSI

Figure 8. SysCon Board

"Installing or Removing a Hard
®
Intel Carrier Grade Server TIGI2U User Guide
Drive".