This chapter shows you how to enable and configure the ZyXEL Device firewall.
9.1 Enabling the Firewall
Click Firewall and then Config to display the following screen. Select the Firewall Enabled
check box and click Apply to enable (or activate) the firewall.
Figure 31 Enabling the Firewall
9.2 E-Mail
To change your ZyXEL Device's E-mail log settings, click Firewall, and then E-mail. The
screen appears as shown.
Use the E-Mail screen to configure to where the ZyXEL Device is to send logs; the schedule
for when the ZyXEL Device is to send the logs and which logs and/or immediate alerts the
ZyXEL Device is to send. An "End of Log" message displays for each mail in which a
complete log has been sent
Chapter 9 Firewall Configuration
Firewall Configuration
P-202H Plus v2 User's Guide
C
H A P T E R
9
88