Figure 10 Wizard 1: Isdn Line Set Up; Table 4 Wizard 1: Isdn Line Set Up - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide

Figure 10 Wizard 1: ISDN Line Set Up

The following table describes the fields in this screen.

Table 4 Wizard 1: ISDN Line Set Up

LABEL
B Channel
Usage
Incoming
Phone
Numbers:
ISDN Data
Subaddress
A/B Adapter1
Subaddress
A/B Adapter2
Outside Line
Prefix
47
DESCRIPTION
This is the bearer channel in an ISDN connection. B channel is a 64 Kbps full-duplex
channel in both primary and basic rate ISDN.
If you are using both B channels, select Switch/Switch (default). If you are only using
one B channel (for example, your ZyXEL Device is sharing the ISDN line with another
device), then select Switch/Unused. If your second B channel is a leased line, select
Switch/Leased.
Type the phone number assigned to you by your telephone company. The maximum
number of digits is 25 for the telephone number.
Enter the subaddress assigned to A/B Adapter 1 (PHONE1). The maximum number
of digits is 25 for the subaddress.
Enter the telephone number assigned to A/B Adapter 1 (PHONE1).
Enter the subaddress assigned to A/B Adapter 2 (PHONE2). The maximum number
of digits is 25 for the subaddress.
Enter the telephone number assigned to A/B Adapter 2 (PHONE2).
If it's necessary to dial an additional number to reach an outside line, type in your
prefix in this field. The maximum number of digits is 4.
Chapter 3 Wizard Setup