Configuring Firewall Rules - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide
Table 23 Firewall > Rule Summary (continued)
LABEL
Log
Rules Reorder
To Rule Number Use the drop-down list box to select to where you want to move the rule.
Move
Back
Apply
Cancel

9.7.1 Configuring Firewall Rules

Refer to Section 8.1 on page 76
To create a new rule or edit an existing rule, click a number (No.) in the last screen shown to
display the following screen.
97
DESCRIPTION
This field shows you if a log is created for packets that match the rule (Match), don't
match the rule (Not Match), both (Both) or no log is created (None).
You may reorder your rules using this function. Use the drop-down list box to select
the number of the rule you want to move. The ordering of your rules is important as
rules are applied in turn.
Click Move to move the rule.
Click Back to return to the previous screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
for more information.
Chapter 9 Firewall Configuration