Figure 201 Applying Schedule Set(S) To A Remote Node - ZyXEL Communications P-202H V2 User Manual

Table 99 Menu 26.1 Schedule Set Setup
FIELD
Action
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Once your schedule sets are configured, you must then apply them to the desired remote
node(s). Enter 11 from the Main Menu and then enter the target remote node index. You can
apply up to four schedule sets, separated by commas, for one remote node. Change the
schedule set numbers to your preference(s).

Figure 201 Applying Schedule Set(s) to a Remote Node

Chapter 32 Call Scheduling
DESCRIPTION
Forced On means that the connection is maintained whether or not there is a demand
call on the line and will persist for the time period specified in the Duration field.
Forced Down means that the connection is blocked whether or not there is a demand
call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call on the line.
Disable Dial-On-Demand means that this schedule prevents a demand call on the line.
Menu 11.1 - Remote Node Profile
Rem Node Name= ?
Active= Yes
Call Direction= Both
Incoming:
Rem Login= ?
Rem Password= ?
Rem CLID=
Call Back= No
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
P-202H Plus v2 User's Guide
Edit PPP Options= No
Rem IP Addr= ?
Edit IP= No
Telco Option:
Transfer Type= 64K
Allocated Budget(min)=
Period(hr)=
Schedules= 1,3,4,11
Carrier Access Code=
Nailed-Up Connection= N/A
Toll Period(sec)= 0
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 300
298