ZyXEL Communications P-202H V2 User Manual page 265

Table 88 Menu 24.3.2 System Maintenance : Syslog and Accounting
PARAMETER
CDR
Packet Triggered
Filter log
PPP log
Firewall log
When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
Your ZyXEL Device sends five types of syslog messages. Some examples (not all ZyXEL
Device specific) of these syslog messages with their message formats are shown next:
28.3.2.1 CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by
1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
Remote Call Number)
Jul 19 11:19:27 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C01 Outgoing
Call dev=2 ch=0 40002
Jul 19 11:19:32 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 OutCall
Connected 64000 40002
Jul 19 11:20:06 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 Call
Terminated
Chapter 28 System Information and Diagnosis
DESCRIPTION
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
The first 48 bytes or octets and protocol type of the triggering packet is sent to
the UNIX syslog server when this field is set to Yes.
No filters are logged when this field is set to No. Filters with the individual filter
Log Filter field set to Yes are logged when this field is set to Yes.
PPP events are logged when this field is set to Yes.
Firewall events are logged when this field is set to Yes.
L02Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means
L02 Call Terminated
C02 Call Terminated
P-202H Plus v2 User's Guide
264