Figure 109 Configuring Clid With Callback; Figure 110 Callback And Clid Connection Test - ZyXEL Communications P-202H V2 User Manual

Menu 13

Figure 109 Configuring CLID With Callback

Telco Options:
CLID Authen= Required
PPP Options:
Recv Authen= PAP
Compression= No
Mutual Authen= No
O/G Username=
O/G Password= ********
Multiple Link Options:
Callback Budget Management:
Allocated Budget(min)=
Period(hr)=
Go to menu 24.8 (ZyXEL Device on LAN 2) and type "sys trcl call" to test your connection
with callback on CLID. The ZyXEL Device displays all communication traces as shown in the
next figure. If CLID authentication fails, this means that the calling number does not match the
Rem CLID number in menu 11.1.

Figure 110 Callback and CLID Connection Test

Chapter 22 Dial-in Setup
Menu 13 - Default Dial-in Setup
Max Trans Rate(Kbps)= 128
Press ENTER to Confirm or ESC to Cancel:
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
LAN_2>sys trcl call
Tracelog type 9080 level 1
### Hit any key to terminate
*** INTL CLID check: ch=7743bc reason=-3026
*** INTL chanErr: chp=7743bc state=6 evt=0300
$$$ CALL CONNECT speed<64000> type<2> chan<0>
$$$ LCP opened
$$$ CHAP login to remote OK
$$$ IPCP negotiation started
$$$ IPCP opened
P-202H Plus v2 User's Guide
IP Address Supplied By:
Dial-in User= Yes
IP Pool= No
IP Start Addr= N/A
IP Count(1,4)= N/A
Session Options:
Edit Filter Sets= No
212