Ip Alias Setup; Table 61 Menu 3.2: Lan Tcp/Ip Setup Fields - ZyXEL Communications P-202H V2 User Manual

Isdn internet access router
Hide thumbs Also See for P-202H V2:
Table of Contents

Advertisement

Table 60 DHCP Ethernet Setup Fields
FIELD
Size of Client IP
Pool
Primary DNS
Server
Secondary DNS
Server
Remote DHCP
Server
Use the instructions in the following table to configure TCP/IP parameters for the LAN port.

Table 61 Menu 3.2: LAN TCP/IP Setup Fields

FIELD
TCP/IP Setup:
IP Address
IP Subnet Mask
RIP Direction
Version
Multicast
Edit IP Alias
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [ESC] at any time to cancel.

18.3.1 IP Alias Setup

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its
single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN
network.
Chapter 18 Menu 3 Ethernet Setup
DESCRIPTION
This field specifies the size, or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
If Relay is selected in the DHCP field above, then enter the IP address of the actual,
remote DHCP server here.
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation
Your ZyXEL Device will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the ZyXEL Device.
Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are:
Both, In Only, Out Only or None.
Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are:
RIP-1, RIP-2B or RIP-2M.
IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to
establish membership in a Multicast group. The ZyXEL Device supports both
IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). Press [SPACE BAR] and
then [ENTER] to enable IP Multicasting or select None (default) to disable it.
The ZyXEL Device supports three logical LAN interfaces via its single physical
Ethernet interface with the ZyXEL Device itself as the gateway for each LAN
network. Press [SPACE BAR] to select Yes and then press [ENTER] to display
menu 3.2.1
P-202H Plus v2 User's Guide
180

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-202u

Table of Contents