Click Maintenance, and then the DHCP Table tab. Read-only information here relates to your
DHCP status. The DHCP table shows current DHCP client information (including Host Name,
IP Address, and MAC Address) of all network clients using the DHCP server.
Figure 65 DHCP Table
The following table describes the fields in this screen.
Table 49 DHCP Table
LABEL
Host Name
IP Address
MAC Address
14.4 Firmware Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with
a.bin extension, for example, "ZyXEL Device.bin". The upload process uses HTTP (Hypertext
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Note: Only use firmware for your device's specific model. Refer to the label on the
bottom of your device.
Click Firmware to open the following screen. Follow the instructions in this screen to upload
firmware to your ZyXEL Device.
Chapter 14 Maintenance
DESCRIPTION
This is the name of the host computer.
This field displays the IP address relative to the Host Name field.
This field displays the MAC (Media Access Control) address of the computer with
the displayed host name.
Every Ethernet device has a unique MAC address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
P-202H Plus v2 User's Guide
154