Page 2
• Initial Configuration - shows you how to configure your P-2802HW(L)-Ix to access the Inter- net, set up a wireless network and register a SIP account on the P-2802HW(L)-Ix. • Regular Phone Line Setup (P-2802HWL only) vices that do not use the Internet.
Page 3
1 Requirements Make sure you have the following things before you set up your P-2802HW(L)-Ix. • Internet access - account information provided by your ISP, such as user name, password, and so on. • VoIP account - You need the account information provided by your VoIP service provider (the company that lets you make phone calls over the Internet).
PHONE port(s) can still be used for making calls. Only one phone can be in use at a time. 3 ETHERNET 1-4: Use an Ethernet cable to connect a computer to an ETHERNET port for initial configuration and/or Internet access. P-2802HW(L)-Ix Series Quick Start Guide...
Page 5
2802HW(L)-Ix) to connect your telephones to these ports. If you only have one telephone, you should use port 1. 5 Use the power adaptor provided with your P-2802HW(L)-Ix to connect an appropriate power source to this socket. 6 Push the power switch to the on position.
2802HW(L)-Ix's IP address 192.168.1.1 (default) as the URL. 3 Follow the directions in this screen. 5 Click Go to Wizard setup. P-2802HW(L)-Ix Series Quick Start Guide 2 Enter the admin password 1234 (default). Click Login. If your browser cannot find this screen, make sure your browser is configured correctly.
Enter the Internet access information exactly as given to you by your ISP in each wizard screen and then click Next to continue or click Back to return to the previous screen. Current screen information will be lost if you click Back. P-2802HW(L)-Ix Series Quick Start Guide...
A Select Obtain an IP Address Automatically if your ISP did not assign you a fixed IP address. Click Apply. Select Static IP Address to give the P-2802HW(L)-Ix a fixed, unique IP address. If you select Static IP Address, enter a WAN IP address, WAN IP Subnet Mask and the neighboring device’s IP address given by your ISP.
Page 9
A Type a User Name, Password and Service Name (Optional). Click Apply. When you use the connection wizard to configure the Internet access using PPPoE, the P-2802HW(L)-Ix is set to get an IP address from the ISP automatically. To set up a static WAN IP address with PPPoE, use the Network >...
To create a wireless network the P-2802HW(L)-Ix and your wireless computer(s) must all use the same SSID (network name), channel and security settings. If you do not set wireless security, any one within range could use your P-2802HW(L)-Ix to access your network and the Internet.
• If you have a laptop, use either a wireless USB adapter or a wireless CardBus card. These are built into many laptops. To add a computer to your network you need to configure your wireless-enabled computer with the same SSID, channel and security settings as the P-2802HW(L)-Ix. P-2802HW(L)-Ix Series Quick Start Guide...
Page 12
Alternatively, use OTIST, ZyXEL’s One-Touch Intelligent Security Technology (OTIST) feature. It allows you to automatically configure the SSID and WPA-PSK on all OTIST- equipped wireless clients within range of the P-2802HW(L)-Ix. See the wireless LAN chapter in the User’s Guide for more information on OTIST.
• Otherwise, first dial the prefix you set in Section 4, and then dial the phone number. Follow these directions to call the phone that is connected to the P-2802HW(L)-Ix. • Use your VoIP service provider’s dialing plan, or just dial the phone number.
2 Make sure your computer is on the same subnet as the P-2802HW(L)-Ix. The P- 2802HW(L)-Ix is set up by default to assign an IP address to your computer. If you have a static IP address on your computer change this setting to obtain an IP address automatically.
Page 15
P-2802HW(L)-Ix Series Quick Start Guide Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.