Figure 39 Firewall > Timeout; Table 28 Firewall > Timeout; Factors Influencing Choices For Timeout Values - ZyXEL Communications P-202H V2 User Manual

9.8.1 Factors Influencing Choices for Timeout Values

The factors influencing choices for timeout values are the same as the factors influencing
choices for threshold values - see
Network to Internet Set or Internet to Local Network Set.
Figure 39 Firewall > Timeout
The following table describes the labels in this screen.
Table 28 Firewall > Timeout
LABEL
TCP Timeout
Values
Connection
Timeout
FIN-Wait
Timeout
Idle
Timeout
UDP Idle
Timeout
ICMP Timeout
Back
Apply
Cancel
Chapter 9 Firewall Configuration
Section 9.3.2 on page
DESCRIPTION
Type the number of seconds (default 30) for the ZyXEL Device to wait for a TCP
session to reach the established state before dropping the session.
Type the number of seconds (default 60) for a TCP session to remain open after the
firewall detects a FIN-exchange (indicating the end of the TCP session)
Type the number of seconds (default 3600) for an inactive TCP connection to remain
open before the ZyXEL Device considers the connection closed.
Type the number of seconds (default 60) for an inactive UDP connection to remain
open before the ZyXEL Device considers the connection closed.
Type the number of seconds (default 60) for an ICMP session to wait for the ICMP
response.
Click Back to return to the previous screen.
Click Apply to save your customized settings and exit this screen.
Click Cancel to return to the previously saved settings.
P-202H Plus v2 User's Guide
90. Click Timeout for either Local
102