User-Defined Address Mapping Sets; Figure 116 Menu 15.1.1 First Set - ZyXEL Communications P-202H V2 User Manual

Table 74 Menu 15.1.255 SUA Address Mapping Rules
FIELD
Global Start IP
Global End IP
Type
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
Note: Menu 15.1.255 is read-only.

23.3.1.1 User-Defined Address Mapping Sets

Now let's look at option 1 in menu 15.1. Enter 1 to bring up this menu. We'll just look at the
differences from the previous menu. Note the extra Action and Select Rule fields mean you
can configure rules in this screen. Note also that the [?] in the Set Name field means that this
is a required field and you must enter a name for the set.

Figure 116 Menu 15.1.1 First Set

Set Name= ?
Idx Local Start IP
--- --------------- -------------- --------------- ---------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Note: If the Set Name field is left blank, the entire set will be deleted.
The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1
(described later) and the values are displayed here.
Chapter 23 Network Address Translation (NAT)
DESCRIPTION
This is the starting global IP address (IGA). If you have a dynamic IP, enter
0.0.0.0 as the Global Start IP.
This is the ending global IP address (IGA).
These are the mapping types. Server allows us to specify multiple servers of
different types behind NAT to this machine. See later for some examples.
Menu 15.1.1 - Address Mapping Rules
Local End IP
Action= Edit
Press ENTER to Confirm or ESC to Cancel:
P-202H Plus v2 User's Guide
Global Start IP Global End IP
Select Rule=
Type
------
218